How to: Upgrade Your Printer
Step 1: Open iDesign. Next, plug your USB stick that has been plugged into your printer into the computer. A picture of the printer will pop up with an USB next to it
Step 2: From here navigate to Function -> Settings -> and then select the System tab next to Head 1. From there 7 columns down is configuration code. Select the pencil to open the window for inserting the new code.
Step 3: Next, copy and paste your code into the window. Once you hit ok you will be prompted to remove the stick and put it back into the printer. If your printer is an X1Jet you can place the stick in at anytime. If your printer is an iJet have the system on the status 1 screen. Once plugged in the system will reset and upgrade will be complete.